Car Battery Tester 12V 6V BM580 For Wet/GEL/Lead-acid Battery Charging Cranking Test CCA Circut Analyzer Auto Accessories

Features:

• BM580 Battery Tester adopts the state-of-art conductance testing technology in the word to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery,healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintence personnel to find the problem quickly and accurately.

• If your car battery suddenly runs out, and you don’t know the cause of this problem. BM580 is a full-style battery analyzer, which can be used by both beginners and professionals.

• The battery tester can provide fast and accurate test results within a minute. Check the battery charging status, the battery health status for you.

• Works on 6 V/12 V battery, CCA100-2000, 2 Ah-220 Ah

• notifies the users to replace battery in advance when the battery getting aged.

• 1. Support test wide range of 6V/12V batteries.
  2. Simple and easy to operate.
  3. Test batteries IN/ OUT of the vehicle.
  4. Accurate results in milliseconds.
  5. Battery life analysis, health percentage.
  6. Analysis Result: Good, Recharge or Replace.
  7. Lifetime free update and upgrade.

• Quadruple Protection

  1.【Overvolatge Input Protection】Below 20V, it can be tested at will without damage the bad internal circuit board has a short circuit.
  2.【Reversible Access】The positive and negative poles are connected incorrectly, and the device can be normal start, the device and battery are not damaged.
  3.【Poor Contact Prompt】When the test clip does not clamp the positive and negative electrodes of the batter, the display will prompt.
  4.【Built-in Buzzer to Remind】During the test, when the battery is in poor condition, the device will give an audible reminder.

• Four functions can be switched at will to help you quickly detect the battery status of your car.
  1.【Battery Test】 Life / Voltage / CCA / Internal resistance
  2.【Start The Test/Cranking Test】Battery discharge performance
  3.【Load Test】 Engine performance
  4.【Charging Test】 Engine charging system

• Regardless Of Positive and Negative, even if the positive and negative polarity is wrong, the device can start normally.

• Voltage Waveform Monitoring
  Monitor the battery status in real time, understand the current floating size of the battery voltage, and have automatic storage and playback functions.

• Support Multiple Battery Types
  It supports a variety of battery standards around the world, can test almost all car start-up lead-acid batteries, and has a wide range of applications.
  1.EPS lead-acid battery;
  2.Car start battery;
  3.AGM / EFB start-stop battery ;
  4.Electric vehicle battery ;
  5.UPS lead-acid battery ;
  6.Gel battery 

  Note: UPS battery/electric vehicle battery/motorcycle battery can only measure internal resistance/power/voltage, not battery life.

• Low Frequency Constant Current Test

  Give the battery a fixed frequency and current test signal, sample, rectify, and filter its voltage, and then calculate the internal resistance of the battery.

• Ten Major Test Standards：GB (2AH – 220AH )
  Geometry supports all current common battery standards, and a wide range of tests can meet your various needs.
  1.CCA: Cold Cranking Amps (100 – 2000 )
  2.BCI: Battery Council International (100 – 2000 )
  3.CA: Cranking Amps (100 – 2000 )
  4.MCA: Marine Cranking Amps (100 – 2000 )
  5.JIS: Japan Industrial Standard (26A17 – 245H52 )
  6.DIN: Germany Auto Industry Committee (100 – 1400 )
  7.IEC: Internal Electrical Technical Commission (100 – 1400 )
  8.EN: European Automoblie Industry Association (100 – 2000 )
  9.SAE: Society of Automotive Engineers (100 – 2000 )
  10.GB:China Naional Standard (2AH – 220AH ) Important breakthrough

• Ripple Test
  Test the charging system of the engine, the smaller the waveform fluctuation, the more stable the voltage, indicating that the battery is in good condition.
  Note: If the test result is normal, the battery is charged normally. If the voltage reading is greater than 15.0V , please check the voltage regulator; if the voltage reading is less than 13.3V, Please check the connection points, wires and engine.

• Screenshot Function

  It has a one-click screen capture function with long press “Up” and ” Down” button., which is used to capture and save important data, fast and convenient.
  ( Note: The device can store up to 10 pictures )

• Mini USB Interface- Free Update Lifetime

  It is used for software upgrade, no need to install driver, the process is simple and easy to operate.

• High Quality Design
  1.【Non-slip Design】Conducive to one-handed operation.
  2.【Integrated Line Machine Design】The interface is stable to prevent falling off and loss, and the wire is strong and not easy to break.
  3.【Physical Button】 Fast response and Excellent finger feeling.
  4.【Alligator Clip】Pure copper, large opening range, strong bite force.

• Pure Copper Alligator Clip
  Large opening range, strong bite force, more precise in the measurement process

Specifications: